ROSCAMAT 400
Roscamat 400; Capacity M2-M24 (M27)

The machine, which can be easily fastened to a work bench or table using three M8 screws or a simple fastening clamp, consists of a radial arm with a 360º turning radius. It is connected to a vertically moving swivel arm that always maintains perpendicularity to the reference plane – which is the machine support surface. It is equipped with a pneumatic motor that includes an air unit (lubricator + filter + regulator) for correct operation. The modular system consisting in a series of 7 quick-change modules (reducers) is provided for coupling to said motor. As a result of this 7 output speeds (90, 170, 300, 550, 750, 1050 and 2100 rpm) are available thus allowing to adapt the tap speed to every type of thread. The handle allows to balance the tilting arm and to position it at the operator's convenience. The modular system admits the quick-change tap holders with or without safety clutch depending on the intended job (blind or through holes). Thread capacity from M2 up to M24 (M27)

Roscamat 400 VH

The ROSCAMAT 400 can be supplied with an articulated head - C43 -. This bracket of easy handling can be set in four different positions 90º apart.

Working Areas
  • Roscamat 400: Radius 1100 mm. Height: 680 + 140 mm. 
  • Roscamat 400 VH: Radius 1220 mm Height: 680 + 140 mm. 
Modular system

The modular system provides for a new concept in the use of articulated tapping arm machines. Driven from a single motor, seven different speed modules are available with their relevant power torques. The seven quick-change speed modules provide the speed and torque for each threading type, from M2 to M24 threads

Moduli

Max.velocità(rpm)

Max.momento tercente(Nm)

Diametro di accoppiamento

Max.filettatura su alluminio

Max.filettatura su acciaio<80kg

Max.filettatura su acciaio >80kg

90

90

150

Ø 31

M27

M24

M22

170

170

79

Ø 31

M22

M18

M16

300

300

44

Ø 19

M16

M16

M14

550

550

24

Ø 19

M14

M12

M10

750

750

17

Ø 19

M12

M10

M8

1050

1050

12.5

Ø 19

M8

M8

M6

2100

2100

6

Con B-16

To drill up to Ø 8 Aluminium, brass, etc.

Quick-change toolholder

A wide range of tapholders, all of them with clutch and without it, apart from other quick holding fixtures for different tools, such as drills, sinking tools, threading dies, socket wrenches, etc are available. · Toolholder with safety clutch: so that it slips when it reaches the hole bottom Type-1 Ø19 capacity range M2-M16 (for modules 300, 550, 750 and 1100) Type-2 Ø31 capacity range M14-M27 (for modules 90 and 170) · Toolholder without clutch: for holding different tools with a cylindrical shank and driving cube Type-1 Ø19 capacity range M2-M16 (for modules 300, 550, 750 and 1100) Type-2 Ø31 capacity range M14-M27 (for modules 90 and 170)

Automatic tap lubrication (OPTIONAL)

All ROSCAMAT units (400, 500 i 500RH) can be supplied with automatic tap lubrication system. The system is comprised of a regulating valve and a lubricant reservoir, and is actuated by the compressed-air system itself. When starting to tap the oil or liquid flow rate can be regulated for the purpose of lubricating the tap during the operation.

Accessories
Tapholders diam.19/1 with clutch M2-M16 (unit)
Tapholders diam.19/1 without clutch M3-M16 (unit)
Tapholders diam.31/2 with clutch M6-M30 (unit)
Tapholders diam.31/2 without clutch M6-M30 (unit)
Dieholder M5-M12 19/1 (unit/size)
Dieholder M16-M20 31/2 (unit/size)
Long dieholder M6-M12 19/1 (unit/size)
Quick change extension
Reducer cup 31-19
Reducer cup 19-13
Clamp
Clamp
Table 500x500
Table 850x850
Table 1100x850
Trolley
Column
Pneumatic lifter
Mechanic lifter
Magnetic support (Ø200)
Magnetic support (Ø250)
Arm extension support (1 m.)
PNEUMATIC MACHINES
copyright
© 2003 · ROSCAMAT
Tecnospiro Machine Tool, SL
Developed by Virtual Labs - v5.0

   
location
Pol.Ind. Pla dels Vinyats, B
08250 Sant Joan de Vilatorrada
Barcelona · España
E-mail: comercial@tecnospiromt.com
E-mail: roscamat@roscamat.com
phone
(+34) 938 764 359
fax (+34) 938 767 738
domain